Send Message
Jiangsu Hanpu Mechanical Technology Co., Ltd 86-512-56998960-8:30 hpsale@hanputech.com
Energy Saving MVR Multiple Effect Evaporation System

Energy Saving MVR Multiple Effect Evaporation System

  • High Light

    MVR Multiple Effect Evaporation System

    ,

    480V Multiple Effect Evaporation System

    ,

    MEE multiple effect evaporator system

  • Applicable Industries
    Sodium Sulfate Evaporation And Crystallization
  • Key Word
    Energy Saving
  • Key Selling Points
    Multi Effect MVR Evaporator
  • Material
    Titanium,Stainless Steel 304/316L,
  • After-sales Service
    Overseas Engineers Available
  • Voltage
    Customized,220-480V
  • Process
    Evaporation Crystallization
  • Capacity
    Customized
  • Evaporation Type
    Continuous Evaporation
  • Warranty Of Core Components
    1 Year
  • Place of Origin
    Jiangsu province,China
  • Brand Name
    HANPU
  • Certification
    CE,ISO9001
  • Model Number
    HP-MEE
  • Minimum Order Quantity
    1 set
  • Price
    100,000USD~1,000,000USD/SET
  • Packaging Details
    Bulk with stronge packing
  • Delivery Time
    90 days
  • Payment Terms
    T/T, L/C, D/A, D/P, Western Union
  • Supply Ability
    1 set/ 3 months

Energy Saving MVR Multiple Effect Evaporation System

Energy saving Multi Effect MVR Evaporator for Sodium sulfate evaporation and crystallization

What is the MEE(Multi-effect Evaporation)System?

The multi-effect evaporator system is a system in which multiple single-effect evaporators are connected in series to achieve continuous evaporation. Since evaporation is a process that consumes a large amount of steam to generate secondary steam, in order to make full use of the waste heat of steam, generally the previous secondary steam is introduced into the next effect as a heat source. This maximizes energy utilization efficiency while ensuring evaporation.

The selection of the number of stages of the multi-effect evaporator depends on various factors such as the specific material properties, the concentration of the incoming and outgoing materials, the temperature, and the energy consumption cost. Generally speaking, more stages will result in lower steam consumption. We are also committed to providing multi-effect evaporators and solutions suitable for various materials.

 

Material process

(1) The raw material is delivered to the front primary preheater by the feed pump through the electromagnetic flowmeter, and then enters the top of the primary effect heater through the liquid distributor for primary falling film evaporation and concentration;

(2) The first effect concentrated liquid is transported to the top distributor of the second effect heater by the first effect bottom material circulating pump for secondary falling film evaporation concentration.

(3) The second effect concentrated liquid is transported to the top distributor of the third effect heater by the second effect bottom material circulating pump for third times of falling film evaporation concentration;

(4) Third effect concentrated liquid discharge, according to the online detection of the hydrometer, real-time detection of the material concentration, if the material concentration reaches the set requirements, it will be interconnected with the discharge valve to open the discharge valve and transport the material to the finished product tank, otherwise, it will open the material circulation valve to make the material recycle into the evaporator again for re evaporation.

 

Steam process

The raw steam enters the primary effect heater for heating evaporation concentration: the secondary steam generated by the primary effect heats the secondary effect, and so on. The secondary steam generated by the third effect enters the end condenser for condensation cooling, and the condensate water is discharged by the condensate pump.

 

Condensate process

The condensate water produced by the primary effect preheating the materials through the water transfer pipe at the bottom of the shell, to save the consumption of raw steam;

The condensate water produced by the secondary and third effect is discharged by the condensate pump, and the discharge has reached zero pollution. The non condensing gas is connected to the end condenser by the non condensing gas pipe and discharged by the vacuum pump.

 

Characteristic

1. Evaporation capacity: From 500Kg/h to 80T/h
2. Material: Stainless steel 304 or Stainless steel 316L;
3. Full closed process, fast and low temperature evaporation;
4. Inside pipes are mirror polishing seamless sanitary pipes, so material is not easy to paste on the pipe. It's easy for cleaning;
5. Low steam consumption: 1kg steam can evaporate 3.5-4 kg water;
6. Low evaporation temperature:part of secondary steam can be inhaled into single-effect heater through spray type hot pressure pump. This would make full use of the heat and the evaporation temperature is low.
7. Large concentration ratio: adopt falling film evaporation, which make the material liquid with larger viscosity be easy to flow and evaporate, hard to scale, short concentration time, the concentration ratio can reach to 1:5.
8. This equipment can realize automatic production, intellectual system management, which is in conformity with GMP standard.
9. Can be designed into different technological process according to the different characteristics of the materials and different users' requirements.

 

Typical three effect falling film evaporator specifications and technical parameters:

Parameter/

Specifications

HP-3.0 HP-4.5 HP-6.0 HP-9.0 HP-12.0 HP-15 HP-20 HP-24 HP-30 HP-50

Evaporation

capacity(kg/hr)

3000 4500 6000 9000 12000 15000 20000 24000 30000 50000

Consumption of

raw steam(kg/hr)

900 1350 1800 2700 3600 4500 4500 7200 9000 15000

Vacuum degree of

each effect

First

Effect

0
 

Second

Effect

448
(mmHg)

Third

Effect

640

Evaporation temperature of

each effect

First

Effect

99
 

Second

Effect

76
 

Third

Effect

53

Steam pressure for

evaporation(MPa)

0.6-1.0(Absolute pressure)
Solid content in feed(%) 6-7(Corn pulp example)
Solid content outlet(%) 42-48(Corn pulp example)

 

Working principle chart

Energy Saving MVR Multiple Effect Evaporation System 0

Client's facility Site

Energy Saving MVR Multiple Effect Evaporation System 1

Energy Saving MVR Multiple Effect Evaporation System 2

Energy Saving MVR Multiple Effect Evaporation System 3